Grill UNO
Design and characteristics.
UNO grill consists of three main parts: a fire bowl, a support post and a roasting surface. Height: 45 cm (including roasting surface). Weight: 20 kg.
UNO bowl.
Steel hemisphere is 3 mm thick. It is made of a whole piece of metal, without a single weld. This particular production technology provides the bowl with a longer service life in comparison with classic grills. Moreover, it completely eliminates bowl's thermal deformation. There are ventilation holes at the bottom of the bowl connected to a similar pattern of holes in the support post. They provide proper air flow to the hearth.
UNO support post
Post is 300 mm high, its base diameter is 320 mm. Although post's main purpose is to hold the grill bowl, it additionally takes part in ventilation and works as ash collector. Post is made of carbon steel, has a form of a truncated cone with a hermetically welded bottom. Thanks to the design, ash is able to accumulate inside the post. It is sizeable, therefore, needs to be cleaned of ash no more than once a month. The system of ventilation holes (they are located at the top of the support post) performs two functions at once. Firstly, they provide air flow into the combustion zone of the hearth and ensure even combustion of wood. Secondly, the holes do not let the base of the barbecue overheat. This allows UNO grills to be installed on any leveled surface.
Roasting surface UNO.
Made of single-piece, heat-resistant carbon steel, it's 6 mm thick. Thin metal disc heats evenly and provides high heat to all the surface. Multi-layer organic coating gives the grill almost unlimited lifespan. For your convenience, roasting surface is slightly curved towards the center of the hearth – this allows you to completely stop moisture from getting outside the grill.
UNOverse of possibilities.
Due to the innovative production technology of the roasting surface, UNO grill gives you an opportunity for a full circle culinary experience. Surface heats up to 350 degrees. You can cook snacks, meat, fish, seafood, vegetables, omelets, pancakes and even desserts. The surface area allows you to roast food for 6 people at the same time. Additional accessories will expand UNO's culinary possibilities: these are grill grate, holders for a cooking bowl and for skewers. It is possible to remove cooking surface while the hearth is lit using special steel handles (they come with all UNO grills).
Usage
To install your UNO grill, find a leveled surface. First, put fire bowl on top of support post and set it with a mounting bolt for safety reasons. Roasting surface is installed on the grill bowl and is attached to it with three legs. Locating slots are deep enough to ensure its firm fixation. To prepare food on UNO grill, start with a small fire, gradually adding firewood. When the surface warms up, apply vegetable oil on it and rub it evenly with a piece of cloth (or use an oil sprayer). The surface is ready for food preparation at once.